User Manual

Multiple patents pending.
RoHS Compliant.
Conforms to STD 514D and Certied
CSA STD 22.2 No. 42.1-00
TemplaTe
HDTV
Power Relocation Kit
aCTUal SIZe
4
1
4"
4
1
2"
IMPORTANT INSTRUCTIONS:
Use the local electrical code approved installation when installing this product.
The electrical parts in this kit are designed to complete the installation. Individual use of these devices may
be used in accordance to National Electric Code Requirements.
This kit is not designed to be powered directly to the circuit panel.
This installation is live (electrically energized) only when the supplied extension cord receptacle end is
plugged to the power inlet and the plug end is connected to a live wall outlet or surge suppressor that is
plugged into a live wall outlet.
If you are not familiar with home wiring systems, please call a qualied electrician to install this product
This Power Feed is not designed to be used as an extension cord outside the wall. Miss use of this power
feed can result in FIRE or DEATH by ELECTRICAL SHOCK. Please read these instructions carefully and
follow ALL Directions.
Before USE:
A Cord set Not Marked for Outdoor or outside the wall use is to be used behind a wall in an indoor wall only.
Inspect thoroughly before installation. DO NOT USE IF DAMAGED.
Look for number of watts on Appliance to be plugged into Power Extender.
See the label on Power Extender for Specic Wattage.
Insure the receptacle you intend to plug the Power Extender into is not more than 15 AMPS and connected
to the circuit panel with a 15 Amp Circuit Breaker.
Do not plug more than the specied watts into this Power Extender.
Make sure Appliance is off before connecting Cord to outlet.
Fully plug into Outlet.
Do not remove bend or modify any metal prongs or pins of Power Extender.
Install Power Extender Ends into a NEMA Standard formatted Mounting Device only.
Insure Mounting devices are securely fastened to the wall and Power Extender is securely fastened to the
Mounting device.
Fully insert plug into Outlets on all connections
Do not use excessive force to Make Connections.
Do not connect a three prong plug into a 2 hole cord.
THIS is A POLARIZED POWER FEED.
Insure Installation meets all NEC code requirements. If unsure consult a licensed electrician.
During Use:
Keep away from water.
Do not use when wet.
Keep Children and pets away from Power Jumper and IEC Cord Set
Do not plug multiple extension cords from either end. Plug only the cord set that comes with the Appliance
into the Duplex Receptacle of the “Power Extender” and an IEC to NEMA 5-13P cord Set into the IEC
Power Inlet of the “Power Extender” to a surge protector or a live 15 amp receptacle.
Do not over bend or apply excessive tension on either cord set plugged into the Power Jumper ends.
Product Use and Intended Application: Product shall be used in dry indoor premise or commercial wiring
in behind and permanently afxed to the interior wall, and be installed or shed in air voids, and joints, and
masonry block or tile walls where such walls are not exposed to, nor subject to, excessive moisture or
dampness. The Power Extender enables the installer to feed power to a HDTV mounted to the wall via an
extension cord plugged into the IEC end and then plugged into a live receptacle from an electrical branch wired
to the circuit panel. The product comes prewired so there is no wiring required by the installer.
SpeCIFICaTIONS:
Model Similarities – Length and Color, Black and White, 7, 8, 9, 10, 13, 15 feet.;
Power Extender Electrical Rating 15 Amp, 125 Vac, 60Hz, 14 AWG Conductor, NEMA 5-15R Receptacle
connected to a IEC 60320 CY14 power inlet.
Power Jumper Assembly Insulated Cable meets UL 514D, CSA STD 22.2 42.1-00
Power Jumper Assembly meets NEC Code: 250.146(D), Isolated Receptacles.
Power Jumper Assembly Cable, Type NM-B (Non-metallic sheathed cable) has a broad range of usage as
dened in Article 334 of the National Electrical Code (NEC).
The Power Jumper is compatible to NEC Article 300.15 (E) Integral Enclosure and NEC 334.40 (B) Devices of
Insulating Material and other NEC code requirements suitable for it intended application.
All Components used in the Power Jumper Cable assembly are UL rated for its intended application.
WARNING
MIDLITE® products shall be installed and used only as indicated in MIDLITE® product instruction sheets.
Instruction sheets are available online at www.midlite.com.
CAUTION For shock protection, this device must be properly grounded. Use copper wire only with this device.
IMPORTANT INSTRUCTIONS
Read and understand all instructions. Follow all warnings and instructions marked on the product. Remember this product is not part
of your home’s electrical wiring system Do not install in areas near water such as swimming pools, baths, sinks, showers, tubs and
wet basements.
SAVE THESE INSTRUCTIONS.