PMR446 Transceiver G11 ” I NSTRUCTION GU I DE Mi dlan d | PMR446 Transce ive r
PMR446 Transceiver Thanks for choosing Midland! G11 is a portable transceiver that is free use in almost all European countries. For further information, we suggest you to look at the “Restrictions on the use” chart. Midland G11 is a multi-task PMR446 transceiver.
MAIN CONTROLS AND PARTS OF THE RADIO 1 1. 2. 3. 2 4. 5. 6. 3 6 4 5 7. 8. 7 10 8 9 9. 10. 8 Antenna Encoder: rotate clockwise or counter-clockwise to select the desired channel Power/volume knob- turn clockwise to power on and increase the volume level. Turn counter-clockwise to decrease the volume level and power off. Speaker Built-in microphone Led indicator: RED: TX; GREEN: RX. PTT: push this button to transmit, release it to receive.
Power on/off and volume adjustment Rotate the Power/Volume knob clockwise to turn the radio on. Rotate the control clockwise /counter-clockwise to adjust the volume level as you prefer. Rotate the control counter-clockwise till hearing a mechanical “click”, to turn the radio off. Transmission To communicate, all radios in your group must be set to the same channel. Briefly press the Function key 1 to enable the Monitor feature in order to make sure that the frequency is not busy, then press the PTT button.
BATTERY RECHARGE WARRANTY G11 is equipped for using a 7,4V Li-ion rechargeable battery pack which can be recharged connecting the socket of the AC/DC wall adaptor to a mains power socket and inserting the jack of the wall adaptor into the desktop charger plug. It takes 4-5 hours to fully recharge the radio. For maximum battery life, we recommend charging the battery pack when the G11 is off and the battery pack is fully discharged.
General Frequency range Working temperature Operating voltage Operate mode Dimensions Weight Antenna impedance Duty cycle 446.00625- 446.09375 MHz (PMR446) -20°+50° 7.4V Simplex 100mm×58mm×33mm (without Antenna) 203g (Battery pack included) 50Ω 5/5/90% Transmitter Frequency stability Output power Max frequency deviation Audio distortion Adjacent channel power Spurious radiation Occupied bandwidth ±2.
PROBLEM SOLVING Problem The radio doesn’t switch on The radio switches off shortly after it has been switched on The battery pack does not recharge The radio switches on but is unable to receive signals Possible Cause The battery pack is discharged and/or has not been installed correctly. Solution Verify that the battery pack is charged and that it has been correctly installed. Discharged battery pack. Recharge the battery pack. The battery-charger has not been connected or installed correctly.
