Owner's manual

midlandusa.com
Midland BTX1FM - Page 3
After the initial charge it takes approximately 6 hours for a full charge�
Attention: Every time the mini USB recharging plug is inserted (or detached), the
device is automatically turned o. To use while charging, turn the device on with the
plug already inserted.
Unit and attaching system
BTX1FM description
The BTX1FM has ve buttons on the front; the three main buttons are multi func-
tion buttons: “Forward” (on the left), “Middle” button and “Back” (on the right)� The
two small rounded buttons are the “Volume +” and “Volume -”�
Description of the wired connections
On the bottom of the unit there are three wired connections:
Charger jack: Recharges the unit using a standard mini USB power supply
Audio kit jack: Connects an audio kit (stereo headset and microphone)
Auxiliary audio jack (AUX) 2.5mm: Can be used to connect an audio source, like a
stereo iPod/MP3 player or GMRS transceiver
Middle button
Volume -Volume +
Forward button Back button
Description of the audio kit
The audio system includes two ultra-at
stereo speakers and two interchangeable mi-
crophones, both supplied with a bracket and
wired connection�
Attaching the stereo speakers
The two stereo speakers have a Velcro adhesive strip that aids in attaching them
to your helmet�
Attention: Do not completely cover your ear with the speakers. You must always
be able to listen to the sound of traffic!
The microphone can be attached to the helmet in the following 2 ways:
Boom microphone
Place the section with the Velcro adhesive strip between the padding and the rigid
cover of the helmet so that the microphone is correctly positioned in front of your
mouth and the white symbol is facing your mouth� This type of microphone is de-
signed for Open Faced and Flip Front helmets�
Wired microphone
Using the Velcro adhesive strip, place the microphone inside the helmet in front of
your mouth� This type of microphone is designed for Full Faced helmets� The mini
connector on the microphone allows you to choose the microphone that best suits
the helmet you are using�
Audio kit jack
The audio kit must be connected to the central jack of the Midland BTX1FM unit
using the “L” shaped connector�
Charger jack
Audio kit jack
Auxiliary audio jack (AUX)