Owner's manual

midlandusa.com
Midland BTX1FM - Page 10
Adjusting the sensitivity of the microphone (VOX)
First enter setup mode:
1� Turn o the unit�
2� Press and hold down the “Middle” button about 7 seconds until the Red LED
light is on permanently�
3� Your BTX1FM is now in setup mode�
4� Tap the “Back” button and the Red LED light changes to a steady Blue�
5� Now press “Volume +” or “Volume -“ to adjust sensitivity� Every time you press
the Volume buttons the Red LED light will ash for conrmation� When you
reach the end of the upper and lower limit, the Red light will not ash�
6� Tap the “Back” button; the Blue LED light will ash several times to display
the selected sensitivity:
One ash = VOX disabled
Twice = Very low sensitivity
3 times = Low sensitivity
4 times = Medium sensitivity
5 times = High sensitivity
The LED light indicator now remains steady Red (setup mode) and the changes
are conrmed�
7� You can adjust the sensitivity again by repeating the steps from step 1, other-
wise, exit setup mode by double pressing the “Middle” button� Once the Red
LED light turns o, the Blue LED will start blinking�
Disabling the VOX feature (Intercom and telephone)
Follow all procedures described in the previous steps and choose the option of only
one ash (VOX disabled)�
Wired connection always in the background
This feature lets you keep the wired connection on, even when the phone or the
intercom is open� This feature can be useful when you connect a GMRS transceiver�
By default this option is on�
Disabling:
› Enter setup mode�
› Turn o the unit�
› Press and hold down the “Middle” button for 7 seconds until the Red LED light
is on permanently�
› Press the “Forward” and “Middle” button together for 3 seconds� The Blue LED
will ash three times�
› Double press the “Middle” button to exit setup mode and use the BTX1FM�
Enabling: Follow the same procedure described above; now the Blue LED will ash
once� To exit setup mode, double press the “Middle” button�
Setup and firmware updates
It is possible to congure and update the rmware of your BTX1FM using the USB
connection to your PC� On the Midland website, www�midlandusa�com, on the
BTX1FM page you can nd the PC software and new rmware updates if available�
Attention: DO NOT CONNECT THE UNIT TO THE PC BEFORE YOU DOWNLOAD AND
INSTALL THE SOFTWARE!
Use at your own risk
The use of this device can impair your ability to hear other sounds and others
around you�
Listening to music or speaking on a telephone may prevent you from hearing others
around you and distract you from riding safely� The use of such device while riding
may endanger you and others, and its use, in some areas, could be prohibited�
Using this device at a high volume may result in permanent hearing loss�
If you experience ringing in your ear or any other hearing related pain, reduce the
volume or discontinue use� With continued use at high volume, your ears may
become accustomed to the sound level, which may result in permanent damage
to your hearing�
Please use this device at a safe volume level�