Operation Manual

ManualsBrandsMidland ManualsAudiobt 1 intercom twin set

Redial Last number (in stand by mode)

Long press of the Phone button

Conversation among passenger, driver

and the phone

During a phone call, short pressure of the Intercom button on the unit which received

the call

Release the ‘extended’ conversation

above

Short pressure of the Intercom button

GPS Navigator (only for driver’s unit)

The control is done only by the GPS

INTERCOM

Start using the Intercom

Start talking/short press the Intercom button

Stop using the Intercom

Stop talking (after 20 sec. you will return to stand by mode)/Short press the Intercom

button

BLUETOOTH MP3 player of the mobile phone (only driver’s unit)

Activate the MP3 player/Play and Pause

Press and hold down the “Intercom” button for 3 seconds.

Forword (next song)

While the music play, short press of the Phone button

Backword (previous song)

While the music play, short press of the AUX button

Deactivate the MP3 Player

Press and hold down the “Intercom” button for 3 seconds.

WIRED CONNECTION

Activate /Deactivate

Short press of the AUX button

SETUP/PAIRING

Enter SETUP mode

Press the Intercom button for 7 seconds while the unit is off

Pairing a Phone or a GPS Navigator

While in Setup mode, press the phone button until the LED light ash Red and Blue

alternately

Pairing the BT1 pillion’s device

While in Setup mode, press the Volume + on one unit (the light will ash Red and

Blue alternately), press the Volume - on the other unit (the light will ash Red and

Blue alternately). On a successful pairing, both light turn to Blue for one second.

Reset all paired devices

While in Setup mode, long press he Volume + and he Volume -. On a successful

reset, the Blue light will turn on for two second.

SPECIAL SETUP CONFIGURATION

3 way conversation always on

While in Setup mode, press the Phone and AUX buttons for 3 sec.

Steady Blue for two seconds= activated Double long ash = deactivated

Change VOX sensitivity or disable it

While in Setup mode, press short the AUX buttons (blue light on). Now, press “Volu-

me +” or “Volume -“to increase or reduce sensitivity. Press again the AUX button to

conrm the new setting and go back to the SETUP mode (Red light always on).

Blue light ashing:

Once = VOX disable

Twice = very low sensitivity

3 times = low sensitivity

4 times = medium sensitivity.

5 times = high sensitivity

Exit SETUP mode

While in Setup mode, long press the Intercom button. The Red light will turn off and

the Blue light starts ashing.