User Manual

Model BR200
midlandusa.com Page 11
OPERATING YOUR RADIO
PROGRAMMING SOFTWARE
Your Midland BR200 radio comes with 16 preprogrammed channels.
The BR200 also comes with programming software to personalize your
business radio. To download the software please go to: midlandusa�com
Note: If there is not a frequency programmed into a channel, you will hear
a loud continueos tone indicating that there is nothing programmed for
that channel.
POWER ON/OFF AND VOLUME
Rotate the POWER/VOLUME knob clockwise to turn the radio on
and increase the volume level. Rotate the control counter-clockwise
to reduce the volume level and to turn the radio off. During Power On,
the radio will beep once and indicate the last channel selected.
3. The charger LED will turn red and begin charging the unit. Charging
time depends on the charge of the battery. After charging is complete
the LED will turn Green.
In order to ensure that the battery pack is fully charged, it is
recommended that the battery pack be charged with the radio
turned off.
1. Only use the Midland Lithium-Ion battery pack.
2. Do not attempt to charge any battery packs other than the one
indicated in the manual. This may cause leakage and damage
to the radio.
3. For long term storage of the radio, turn the radio OFF and
remove the batteries from the radio.