User manual

Melody-Tracker-Mode

In this mode, a 2nd vocals is added to your vocals as soon as you activate the

HARMONIZER button (illuminates in blue). The prerequisite for this is that

your MIDI les contain a melody-track (many MIDI le producers use MIDI

channel 1 for this, in © M-Live MIDI les it is MIDI channel 4).

You can do the setting for Melody-Tracker MIDI channel in the menu MIDI

SETTINGS -> MELODY TRACK. If your MIDI les do not have melody vocals,

you can also connect a keyboard to the MIDI IN of MP11 and play the melody

vocals on your own. You can do the necessary settings as already described

above. You have conguration options also for the Melody-Tracker mode.

Begin by pressing the CONTROL button to open the HARMONIZER SETTINGS

window:

• Mode

For setting the Melody-Tracker mode

(additionally available value = Harmonizer).

• Efx

For setting the reverb-ratio for the Melody-Tracker. The percentage value

here indicates the eect-ratio of the Melody-Tracker vocals versus the

eect-ratio of the microphone signal:

50% = half the level, 100% = same level, 200% = double the level.

The eect-ratio is also connected with what you have set for the MP11

reverb controller.

• Octave

For setting the Melody-Tracker‘s octaving (available values: -2 to 2 octaves).

• Dry/Wet

For setting the balance between the original-signal (Dry) and the Melody-

Tracker signal (Wet). Trying out dierent Dry/Wet values and applying bits

of your skills, you can pull o great eects, for example:

double the voice, add a slight chorus-eect, set a vocoder-eect (like „Cher“

does in her songs), etc

MELODY-TRACKER