Owner`s manual

....
Module Player
83
10 Test trigger When selecting this button, the defined trigger in the context of the whole
song will be played as a test. You end the playback by pressing the [STOP] key in the
operation panel of the remote controller.
11 OK Accepts the parameters of the whole screen and closes the window.
12 Cancel Closes the window and discards all changes. The condition in which the
MULTISTATION was after the last time of selecting the [OK] button is restored.
Depending on the changes that you perform in the window, a security question will appear after selecting the [Cancel]
button: “MIDI file is changed (by trigger notes edit). Do you want to save it now?”. Select Ye s to accept the changes,
select No to discard the changes. After the window closes, you will again see the [Assign Files] screen. The new
assigned audio files with the corresponding trigger notes appear there in the main area of the window. If you want to
change a link of an audio file at a later point, then highlight the desired file in the main window and select the [Edit]
button.
9.18 Functions Menu in the [assigns] Screen
You have the following options in the functions menu of the [assigns] screen:
1 Edit Opens the window to select and define the audio files and trigger
points. The functions there are described in chapter 9.16 - Bottom Line
in the [Assign Files] Screen - on page 80.
2 Delete Erases the highlighted line and therefore the patch’s link with the
shown audio file.
3 New Opens the screen in which the linking of the audio files takes place. This screen is
described in chapter 9.17 - Linking Audio files with the current Patch - on page 81.
4 Layers You may assign sounds to a patch. After selecting the Layers entry you may
choose in the next window which layer you want to edit. Please, for additional informa-
tion consult chapter chapter 8.5 - Understanding a Layer - on page 45.
5 Play Plays the highlighted audio file.
9.19 Icon Line in the Player / “song” Icon