Owner`s manual

Reference Section
82
the MULTISTATION does not recognize your chosen trigger notes. In order to recognize
your trigger notes, they have to be established in the [Note:] field. Afterwards all notes
with the desired pitch are recognized and displayed as trigger notes.
Please note that you have to define a track as trigger track before creating a MULTIFile. This can be done in the
[MediaProp] screen, which can be accessed through the [song] icon in the icon line. For more information about this,
refer tot chapter 9.19 - Icon Line in the Player / “song” Icon - on page 83.
In the following figure, a trigger point has been detected in measure 4/1/1:
7 Add point This button allows you to add an additional trigger point. Please note that a
new trigger point is always related to the established note number in the [Note:] Field.
The new trigger point is always inserted in the measure position that is shown in measu-
res, beats and MIDI ticks below the [Add point] button. To change the measure position,
select the desired field and enter the new value through the keypad or the data wheel. Use
this function if you want to add a new trigger point but you also want to avoid the proce-
dure of editing the MIDI file in the computer and transfering it back. Use this function
also if you notice that a trigger point is not in the right location. In this case, add a new
position through the Add Point function. Please notice that the trigger point that you want
to change has to be highlighted in the window with the title [Trigger points:].
8 Delete Point Erases the highlighted trigger point from the list.
9 0/0/0 Selects the measure position to change the position of a recognized trigger point.
Use the keypad for input, confirming it with the [ENTER/YES] button, or use the data
wheel.