Owner`s manual

....
Module Player
81
9.17 Linking Audio files with the current Patch
After selecting the New or Edit button in the bottom line of the [Assign Files] screen, the following window will open:
This screens gives you the following options:
1 Channel Here you may select which of the eight available audio channels you want to
play the audio.
2 Note This function allows you to set up which note you want to use as the trigger note.
When creating a MULTIFile, you have to pick the same note that is the trigger note in the
MIDI-File. If you assign several audio files to one single audio song, you may select any
kind of notes. But please remember that the notes are not allowed to occur more than
once.
3 Sound When selecting an audio file through the [Browse] button, the file name will be
shown here.
4 Browse Opens the file manager where you access and browse the internal or external
storage device. Select here the audio file that you want to link to the current patch.
Afterwards, click on the [Accept] button. In order to open a folder, use the [Open] button.
To abort this process and to return to the previous screen, select the [Cancel] button.
5 Hot (Preloaded) Here, you can select wether or not to pre-load of the selected audio file
when activating the current patch. When this option is enabled, the beginning of the file is
loaded into memory, allowing it to play the file right away when starting the song. In the
latest versions of the operating system this function is always activated as a standard set-
ting.
6 Trigger Points: This field on the right upper corner of the screen shows the measure
positions of the (by the MULTISTATION) trigger notes in a MIDI file. Please note that