Owner`s manual

....
Module Player
77
7 Wait: song end Plays the current song to the end and then waits for a new command.
8 Wait: song start Waits for the user to start the song.
9 Wait: song time bbt Plays the song up to a definable song position and then waits for a
new command. By selecting this step a new window will open where you may enter the
desired song position in the format of Bar/Beat/Tick. Please press OK after entering the
song position.
10 Wait: song time ms Plays the song until a definable time span has passed; it waits then
for a new command. If you select this step a new window will open where you may enter
the desired duration in milliseconds. Please press OK after the input.
11 Wait: step time bbt Waits a definable time span (in Bars, Beat and Ticks) and resumes
the execution of the step list.
12 Wait: step time ms Waits a definable time span (in milliseconds) and resumes the
execution of the step list.
13 Wait footswitch1 step Waits for the pressing of foot switch 1.
14 Wait footswitch2 step Waits for the pressing of foot switch 2.
15 Wait any footswitch step Waits for the pressing of any foot switch.
16 Goto step Jumps to a defineable step in the step list and creates a loop that will be played
until the job is ended. After selecting thins function a window will open wich allows you
to enter the desired step in the
Step field. To close the window press OK.
To end a job, switch to the related screen via the icon line job (if you´re not there anyway). Then select the [Quit] button
and answer the question „Quit job execution?“ with [Yes]. In adddition to that a job can be ended by pressing and holding
the [Stop] key.
Here is an example for a simple job:
Thereby the following happens:
Step Event Param
1 Activate P1#1: Wicked Game
2 Play
3 Wait: song end
4 Activate P1#2: Truly Madly
5 Play
6 Wait: song end
7 Stop