Owner`s manual

....

Module Player

9.12.3 Functions Menu in the {Job] Screen / Job> Entry

After selecting the Job> entry you have five options, described below:

1 Job Save Saves the job. Afterwards an info window will pop up with

the note “Job saved”.

2 Job Save as Saves the job with a different name. After selecting the

function the window with the keyboard screen will open. Enter the new name. More about

the use of the keyboard screen can be found in chapter 9.2.1 - Functions Menu in the

„Player“ Module / Entry “Patch” - on page 55.

3 Job Link New Links a job with the current patch.

4 Job Unlink Cancels the link between a job and a patch.

5 Job Clear Removes all entries from the step list.

9.13 Bottom Line in the [Job] Screen

Besides the functions menu that was described in the previous chapters you will find in the bottom line five additional

buttons with functions:

1 Back Switches to the previous selected screen.

2 Play Starts the job and executes the step list.

3 Edit Recalls the [Edit Job Step] screen, where you may edit the current step.

4 Add Adds a step by prompting into the [Edit Job Step] screen where you can determine

the type of step you want.

9.14 [Edit Job Step] Screen

You may define the individual steps of a job in this screen. This screen may be opened from the icon line (e.g. in the

patch list) by clicking on the

Job icon. Then open the Func functions menu on right of the bottom line and select

there

Step > Modify or click the [Edit] button if you´re already in the Job screen. Now the desired screen will

open.