Owner`s manual

Reference Section
74
As usuall, you may select the individual steps of the jobs with the data wheel and/or by clicking on it.
9.12 Functions Menu in the [Job] Screen
All functions that can be executed in relation to the [Job] screen can be found in the “Func” functions menu to the
right of the bottom line. The functions menu is organized in degrees (like all other areas of the MULTISTATION). This
means that after selecting a menu, additional windows might open. As usual in the MULTISTATION, you may also
open the menu entries through the touch screen or by entering the corresponding number in the keypad. By selecting
the [Drives] screen an additional menu will appear at first. It is there that you may select the individual functions
related to jobs. Particularly, you have the following functions at your disposal:
9.12.1 Functions Menu in the [Job] Screen/ Step> Entry
After selecting the Step> entry you have four options:
1 Modify Opens the [Edit Job Step] window. You may set up the
actions that are assigned to a step. Please refer to chapter 9.14 - [Edit
Job Step] Screen - on page 75 for further instructions.
2 Delete Erases the highlighted step in the step list.
3 Insert above Adds a step above the highlighted step.
4 Insert below Adds a step below the highlighted step.
9.12.2 Functions Menu in the [Job] Screen / Selection> Entry
After selecting the Selection> entry you have five options, described below:
1 Copy Copies the highlighted step to the temporary memory. The
original entries remain in their position.
2 Cut Copies the highlighted steps to the temporary memory. The
original entries are deleted (cut out).
3 Paste After Inserts the content of the temporary memory after the highlighted step.
4 Paste Before Inserts the content of the temporary memory before the highlighted step.
5 Delete Erases all highlighted steps.