Owner`s manual

....
Module Player
73
A job is taken by the patch list as a normal song. It might start and stop through the Play and Stop keys on the
operation panel of the remote controller or through the buttons on the bottom line of the patch list. It is also possible to
use a foot switch, allowing you to focus 100% on your playing during a live operation.
To create a job you have to use an empty place in the patch list. If needed, add an empty patch through the functions
menu. For this purpose, use the
Player module on the main screen and then select the commands Patch >
Insert
of the Func functions menu to the right of the bottom line. The question “Do you really want to INSERT
new patch?” will appear; answer in this case with
Yes.
You may now select the job icon in the icon line. A dialog window with the following note will appear: “There is no
job linked to current patch. Do you want to create new?“ Answer the question with
Yes. The window with the screen
keyboard will open. You will find more information about the use of this screen in chapter 9.2.1 - Functions Menu in
the „Player“ Module / Entry “Patch” - on page 55. Enter a name for the job and select
OK. The following screen will
appear:
The screen is organized similarly to the patch list, except that you will find jobs here instead of patches. The individual
columns have the following meaning:
1 Sel: Indicates if something is highlighted. Multiple selections are also possible here.
2 # Indicates the number of the step.
3 Event Indicates the command that is executed when the step is reached. If a new Job has
been created nothing (empty) will be shown here.
4 Param Indicates additional parameters that may differ, depending on the command. If the
Wait: command has been selected, the Param field will show song time bbt
5:0:0
in the parameter field.