Owner`s manual

Reference Section

9.9.2 Functions Menu in the [Layers] Screen / “Patch File” Entry

By selecting the “Patch File” entry in the functions menu “Func”, another menu will open at first.

All entries there are related to the currently loaded patch list. You will find the following functions:

1 Open... This function loads a new patch list. After selecting the menu

entry you will get to the screen entitled: “Select file to open”. Now

you are at the hard disk of the MULTISTATION and may scroll down

with the scroll bar at the right side of the window. However, you may

also access all other storage devices from this screen. Entries with the ending *.pch

represent patch files (therefore patch lists). In order to load such a patch list, select the

corresponding line and click on

Accept. In case you have your own patch list saved in

your own created folders, you may open these folders by highlighting the entry and

selecting

Open. To abort the loading process, select the Cancel button.

2 Save This function saves the patch list. This is especially important after making changes

to a patch list. After starting the saving process, a window with the confirmation “Patch

File saved OK” will appear. Click on

Ok. Please remember:

Changes to a patchlist are not automatically saved. They have to be saved explicitly through the functions menu.

3 Save as... This function allows you to save the current patch list under a new name, for

example to make a security copy. After selecting the entry, a keyboard screen will appear.

You will find more information about the use of the keyboard screen in chapter 9.2.1 -

Functions Menu in the „Player“ Module / Entry “Patch” - on page 55.

4 New... Through this function you may create a new (empty) patch list. After selecting the

button, a window with the question “Do You want to clear all current patches and create a

new patch file?” will appear. If you are not sure, select

No, otherwise confirm with Yes.

If you select “Yes ”, the keyboard screen will appear. Enter the new name and click on

Ok.

You will find more information about the use of the keyboard screen in chapter 9.2.1 -

Functions Menu in the „Player“ Module / Entry “Pat ch” - on page 55. Please remember

to save the new patch list!