Owner`s manual

Reference Section

2 Save as... Allows you to save the currently active patch with another name. After selecting

this function, the keyboard screen will appear. You will find more about this in chapter

9.2.1 - Functions Menu in the „Player“ Module / Entry “Patch” - on page 55.

9.7 Bottom Line in the [Drives] Screen

Beyond the functions menu described in the previous chapter, you will find in the bottom line four additional buttons

with functions:

1 Back Takes you back to the previous screen.

2 Open Opens the currently highlighted (black background) file.

3 Assign Assigns all audio files of the highlighted folder to the current patch. Use this

function to merge (already edited) audio files in one step to an audio song (see also chap-

ter 8.1 - Creating an Audio Song - on page 40).

4 Refresh Reloads the content of a storage device (e.g. after switching a disk).

9.8 Icon Line in the Player / “layers” Icon

This chapter assumes that you are familiar with the basic functions of a layer. If this is not the case, refer to chapter 8.5

- Understanding a Layer - on page 45.

You can access the [Layers] screen either through the layers icon in the icon line of the player or through the

operation panel of the remote controller, by holding the “PERF” key pressed until the screen appears.

This is the screen that will appear: