Owner`s manual

....
Module Player
61
9.2.6 Functions Menu in the Player Module/ „Layer Select“ Entry
This function enables you to recall all layers to the display. This is very useful e.g. if you
want to get an overview about all entries assigned to a certain layer. Other than that the
selected layer is ready to be edited. So all changes you make will be assigned to the selec-
ted layer.
After you´ve selected the entry [Layer select] in the functions menu another menu appears
which offers the following possibilities:
1 Set Layer 1 Recalls layer 1
2 Set Layer 2 Recalls layer 2
3 Set Layer 3 Recalls layer 3
4 Set Layer 4 Recalls layer 4
5 Set Layer 5 Recalls layer 5
6 Set Layer 6 Recalls layer 6
7 Set Layer 7 Recalls layer 7
8 Set Layer 8 Recalls layer 8
9 Set Player Recalls the player
9.3 Bottom Line in the Module Player
Besides the functions menu, which has been described in the preceding chapter, you will find five additional buttons
with functions in the bottom line:
1 Back Switches back to the screen that has been previously recalled.
2 Te xt Recalls the text file that is linked to the current patch. At the same time the buttons of
the bottom line are allocated with the functions Edit, Delete, Insert and Save. These
functions are explained in chapter 9.2.4 - Functions Menu in the Player Module / “Medi-
aLinks” Entry - on page 59.
3 Play Activates the patch with the black highlighted bar and starts the playback.
4 Jingles Recalls the Jingle screen. Detailed informations in chapter 17 - The Jingles
Module - on page 173.
5 Sort Sorts all entries in the patch list. This happens either alphabetically or according to
the patch number. There is no function to reverse the sorting, but you may cause it by
briefly switching to another screen and then return. This will make the sequence of the
patches turn back to their actual saved order.