Owner`s manual

Reference Section

following question will appear: “Do you really want to unlink the file xyz from this

patch?”. By clicking

Yes, the patch and text will be separated; No aborts the procedure.If

you select

Yes the following confirmation will appear “File was unlinked from patch.”

Press

Ok and the procedure is completed.

Hint… You may save any number of undesignated text files to the hard disk or other storage devices. The designation

may be done at any later time. Same text files may be linked to different patches without any problem. In order to assign

a text file to a patch, just highlight the chosen patch in the play list. Afterwards, select the

drives icon on the very left

of the icon bar. Then, search for the text file on a storage device and select

Open. A window with the following

confirmation will appear: “Selected text file is linked to current patch“. Press

Ok, in order to complete the link. In the

patch list you will see that the corresponding patch in the “Info:” column has a “T” for the added text file.

Hint… In order to see a text that is assigned to a patch, select the specific patch in the patch list. Then click on the

Text button. The text wil be shown; at the same time the buttons Edit, Delete, Insert and Save appear

at the bottom line. They correspond to the above described functions within the MediaLinks function menu. You may also

change a text file from here.

9.2.5 Functions Menu in the Player Module / “Selection” Entry

This menu entry allows you to select and process patches in the patch list. You will recognize if a

patch is highlighted or not by the check mark in the “Sel:” column. By selecting this entry in the

functions menu, another menu will appear at first. The following functions are available to choose

from:

1 Select all All patches of the patch list will be selected.

2 Unselect all The selection of all highlighted patches is canceled.

3 Invert selection The selection is reversed. Selected patches become

unselected, and vice-versa.

Hint… No basic function for deselection exists explicitly. It is sufficient to switch the screen and to go back to the patch

list afterwards.