Owner`s manual

....
Module Player
57
8 Move To... Moves the highlighted patch to a new location. The same window from the
previous function will appear. Enter the new location and click “Ok” to start the copy
process. The highlighted patch will be moved; the original location deleted. Click
“Cancel” to abort the process.
9 Swap With... Exchanges the highlighted patch with the patch that is indicated in the
following window. The same window from the previous function will appear. Please
proceed accordingly.
10 Auto play... By activating this function for a patch, the playback will start automatically
afterwards; the pressing of the “PLAY” key is dropped. After selecting this entry an
additional menu will open which allows you to choose between “Enable” (Auto play on)
and “Disable” (Auto play off). The function for each patch has to be activated separately.
11 Recalls... By selecting this function another screen will open. There, you may establish if
the current active patch in a specific layer should recall a specific layer program. You will
find more about layers in chapter 8.5 - Understanding a Layer - on page 45.
12 Clear selected Deletes the entries in the patch list. The nummerical order remains,
resulting in empty spots.
13 Delete selected Deletes the entire entry, including the nummerical order. The following
entries in the patch list will move up.
14 Save selected as... Exports the selected patches into an independent patch list. After
selecting this function, the keyboard screen opens. You will find more details under item 3
in this list. Type in through the keyboard screen a new name and click afterwards OK. Use
this function if you want to use patches of the active patch list in another list.
New Location