Owner`s manual

....
Module Player
55
for a text file. The entries may appear combined; MAT would then stand for a
MULTIFile with text.
• You may select the patches in the “Sel:” column by clicking on them. With that, the
punctuated rectangle will be replaced with a check mark. The selection allows you to
choose patches that you want to edit with the “Func” menu on the bottom line. It is
possible then, for example, to delete several (selected) patches in one step, or to export
an individual patch list.
Please, do not confuse the Selection function in the column “Sel:” with the condition “Active Patch”. Only one patch can
be active (playable), it is indicated by a black bar in the patch list.
• The screen may show up to eight different icons in the icon line, which were not fully
implemented at the printing of this manual. The icons give you access to a multiple
number of functions that are directly or indirectly related to the patch list.
• The bottom line on the lower part is composed from left to right of five bottons, which
initiate different functions, depending on the screen. The button on the very right is
always designated with “Func”. It allows you to get to the functions menu containing
additional functions. These too, are different, depending on the current screen. They
will be explained further in this chapter.
9.2 Functions Menu in the Player Module
Many functions related to the patch list are found in the functions menu “Func” on the right side of the bottom line.
The functions menu of the “Player” Module is organized in levels, so that after selecting a menu part additional
selection windows will open. Common to the MULTISTATION, you may also open the functions menu via touch
screen and the contained menu parts via touch screen or by entering the indicated number on the keypad. It is also
possible to make the selection with the data wheel.
9.2.1 Functions Menu in the „Player“ Module / Entry “Patch”
If you select the “Patch” entry in the functions menu “Func”, another menu will appear at first.
All entries there relate to the patches that are in the currently loaded patch list. You will find the
following functions:
1 Next Skips to the next patch and activates it.
2 Previous Skips to the preceding patch and activates it.
3 Rename Opens a new screen in which you may rename the patch.
Have a look at the following picture of this screen with the related
explanations: