Owner`s manual

....

Good to know...

11 Done - press the [Play] key on the remote control and enjoy the slideshow you just crea-

ted.

12 Don´t forget to save the pach list with the new entry. To do so, press the [Perf] key and

then the [Func] key. Then select the entry Patch File and afterwards Save.

8.8 Updating the System

Periodically, new updates are available at the MIDITEMP website. If you have internet access, you are able to update

your MULTISTATION any time. If you do not have internet access, you might know someone who would download

the update file for you.

To upload an update, proceed the following way:

1 Download the file for your type of device and unzip it on the hard disk of your computer.

2 Copy the unzipped files to disks, a SmartMedia card or through USB to the hard disk of

the MULTISTATION.

3 Start the installation by selecting the file with the ending “.UPD” in the file manager and

pressing the [ENTER/YES] key. The file type will be indicated as “SoftUpdate”.

4 After a security question, the MULTISTATION will upload the file and ask for the next

one ("Do you have next medium..."). If you are using disks for transfering the files, insert

the disk with the next file and select Ye s . This procedure will repeat for all existing update

files. Please be careful to insert the disks in the right sequence (after *.UPD follows

*.U01, then *.U02, etc.) If all files are together on one Medium, you will also have to

confirm withYe s in order to transfer the next file.

5 After transfering the last update file you will have to click on No to indicate that no more

files are available.

6 Now, select OK. The MULTISTATION will perform the update operation. During this

time, the power of the device should not be turned off!

7 After performing all update operations completly, the MULTISTATION will indicate the

dialog window, saying: "Update finished ... Please turn off/on the device". Click OK, turn

the power of the device off and after a few seconds on - the new operation system will be

active.

All user settings will remain and do not have to be re-entered after the update!