Owner`s manual

Quick Start

Now the filter is set up and you may return to the area of the layers. For this, hold the [PERF] key.

As a last step, you should name the layer (e.g. with AFT-Filter), so that you might know exactly what you have

programed. Proceed the following way:

• Select on the layers screen [Func] > Patch > Rename. This will open the keyboard

window where you can name the setting (the patch you just programmed). Afterwards,

confirm with OK. The name will appear in the corresponding layer field. If you have done

everything right, the result will look like the next figure:

8.6 Switching from Multiplayer to Multistation

The Multiplayer is the Multistation´s predecessor, and is manufactured still and used worldwide. The following hints

are for users who want to switch from a Multiplayer to a Multistation.

8.6.1 Importing and converting assign files

To transfer an old assign file from Multiplayer to Multistation, proceed as follows:

1 Transfer all data from the Multiplayer to the Multistation by making a SCSI-connection

between the two units first.

2 Then mount the Multiplayer within the Multistation as an external unit. Choose Setup

>Device Mounting > (free)