Owner`s manual

....
Good to know...
41
3 Transfer the audio files to the MULTSTATION. For this, burn a CD or use the USB port
(see chapter 8.3 - Using the USB port - on page 42).
4 Select an empty patch and activate it.
5 Open the file manager by selecting the drives icon. Search the folder with the song’s
name and highlight it. You do not have to open the folder.
6 Click the [Assign] button on the bottom line of the screen.
The audio files will be assigned automatically (in sequence) to the MULTISTATION’s audio channels. The current
patch will receive the name of the folder and therfore the name of the song. Press the [PLAY] key to start the song.
The MULTISTATION is able to play mono as well as stereo files. This also works mixed, but only up to the total of eight
audio files. Stereo files figure as 2 tracks.
8.1.3 About the screen [HD Arrange]
The Multistation enables you to record audio (and of course MIDI) directly to the internal harddisk. HD Arrange is a
comfortable possibility to do so. In this screen you can set up all settings needed out of one single screen. Recorded
audio files will be graphically displayed as rectangles in an arrange screen. You can find more information in
chapter
9.20 - HD Arrange - on page 87.
8.1.4 Using the Grabbing function
You can automatically copy (grab) songs from an ordinary CD to the harddisk of the Multistation. To do so, please fol-
low these steps:
1 Insert a CD into the drive you want to use for copying files to the harddisk.
2 Switch to the file manager using the symbol d r i v e s.
3 If you´re not in the top level, press and hold the [● ] key.
4 Select the entry CD and then click on [Open] on the bottom line.
5 Mark the track number to copy. Under certain circumstances you might have to refer to
the booklet of the CD.
6 Do not click the [Open] key (as you might use to do), but open the functions menu by
pressing [Func] on your remote control.
7 Select File(s) and then Copy. The file will be marked now and ready to copy.
8 Select the harddisk. The easiest way is: [● ] > hdd > [Open]
9 Select the folder you want to store your song in and open it with [Open]. To create a new
folder here as well, choose [Func] > New > Directory.
10 Select [Func] > File(s) > Paste. The song will be copied now from CD to harddisk.