Owner`s manual

....
Working with the Patch List
29
7. Working with the
Patch List
7.1 Getting Started: Playing Songs from the included Patch List
The MULTISTATION is supplied with a small demo patch list. Shortly after switching on the device it allows you to
work right away. To take a look at the supplied patch list, select on the main screen the
Player icon. The “Patches”
screen will open (you may recognize this by the screen title on the upper right corner).
You have several ways to select a song (or a patch) from the patch list:
1 Turn the data wheel until the desired song is marked This marking appears as a frame
which moves when you turn the data wheel. The already active patch stays marked black.
Once you marked the new entry, press the [ENTER/YES] key to activate the patch, then
press [PLAY].
2 Move with the [FWD] and [REW] keys gradually through the patch list. In contrast to the
before mentioned method, the selected patches are automatically activated here.
Depending on the size of the song it might take a while. Therefore, you should only use
this method if you want to jump quickly to the next patch and activate it at the same time.
3 If you know the patch number you may input it through the keypad. Press [ENTER/YES]
afterwards.The new entry will be activated automatically again, and is ready to play at
once.
4 Click on the patch number in the title line, left to the patch name. Modify it with the data
wheel and then press [ENTER/YES].
5 You may also sort the content of a patch list before activating it. To sort alphabetically by
the patch name, click on the entry "Patch Name:" on the info line of the screen. You may
use this same procedure to sort by the patch number. To do this, click on the entry "Num:"
on the info line. To sort by the type of file click on the entry "Info:"
You may also select a new patch (framed marking) while another is still being played.