Owner`s manual

....
Main Screen
15
4. Main Screen
After turning the power of the MULTISTATION on, the system is initialized, loading the internal programs which are
needed for the operation of the device. The whole process is automatic and you may see one or another progression bar
on the screen of the remote controller.
After all the codes are loaded the screen will not change anymore - you have reached the main screen.
From this main screen you may activate all functions of the MULTISTATION. To facilitate your navigation, it serves
as reference point to which you can return from any level of the MULTISTATION with a single touch of a button, by
holding the [EXIT/NO] key. You can make use of this function especially when you get lost in the menus during your
phase of getting acquainted with the device; it takes you right away back to the starting point.
The main screen in itself is divided into three bigger areas, the title line, the bottom line and the main area in-
between. You may select an icon by touching it with your finger tip. Afterwards, the area is highlighted either with a
black background or with a frame. In the case of the main modules (e.g. Player or MIDI), this highlight will only be
seen briefly, since the finger touch opens the corresponding icon and switches the MULTISTATION into another
screen. If a highlight is visible, it means that the MULTISTATION is expecting an input from you, either by turning
the data wheel or by direct input through the keypad. You may also move the highlighted selection from one entry to
another with the arrow cursor keys on the remote controller. However, to open the selection (and enter to a deeper
level) you have confirm the selection by pressing the [ENTER/YES] key.