Owner`s manual

....
Setup Module
155
16.4 Player
• Patch File Defines the patch file to be loaded as a standard when booting the
MU LT IS TAT I O N.
• Logo Image Defines a picture in JPEG format that is shown as background image
when connecting a TV or video device.
• Player Default Routing Defines one or several outputs to which the song player’s
MIDI signals are sent as standard. In this case it´s not necessary to manually set the
routing to the desired output in every patch.
• Reset Send Once this function is activated the Multistation sends the reset command
following the MIDI standard every time the [Stop] key is pressed. To prevent that mark
the entry Disabled in the right area of the screen.
• Fade time Here you can define how much time it takes to crossfade in the D.J. module
as a standard.
• Prebuffering Changes the size of the buffer memory where audio files to be played are
pre-loaded.
16.4.1 FootSwitch 1
• Polarity Switches the polarity of the foot switch 1 between positive and negative.
• Function Assigns in a menu a function for the foot switch. You have at your choice the
following functions:
- Start/Stop player
- Stop/Continue play (pause function)
- Patch up (fwd) (skips to the next patch)
- Loopmode on/off (turns the loop function on/off)
- Panic (activates the Transparent MIDI Reset, TMR, panic function )
16.4.2 FootSwitch 2
• Polarity Switches the polarity of the foot switch 2 between positive and negative.
• Function Assigns in a menu a function for the foot switch. You have at your choice the
following functions:
- Start/Stop player
- Stop/Continue play (pause function)
- Patch up (fwd) (skips to the next patch)