Owner`s manual

....
Setup Module
153
16.2.1 Effect Presets
• Store here up to eight presets with effect configurations.
16.2.2 Inputs
• Level Switches the reference level of the audio signal between -10 dB and +4 dB.
• Gain Switches the input amplifier of the audio input between 0 dB, 6 dB, 12 dB and 18
dB.
16.2.3 Synth
• Sound Font Defines the SoundFont bank that is loaded when booting the
MULTISTATION. To change the current SoundFont bank click on the [Browse] button
on the right side of the screen and look for the desired SoundFont bank on the medium
(recommended: the harddisk). Then click the [Open] button.
16.3 MIDI
• Panic Disable In the right part of the window you can define output ports which are
not supposed to react to an eventually activated TMR function (Transparent MIDI
reset/Panic function). All ports provided with a mark in the Set column won´t be
included in the TMR function.
• MIDI control Here you can define the ports that are used to switch the patches of the
Multistation by MIDI commands from outside. Therefore click the [Edit] button, and
the following screen opens: