Owner`s manual

Reference Section
146
One more hint: If you have routed a single channel in the audio areas (tracks, Ktracks, synthA, synthB,
effect or line), the associated selection field will appear marked in the master area. This indicates that
at least one channel of the tracks area is also routed to line output 3/4. To verify what channel it is,
you have to switch to the [tracks] routing screen.
11.15 Functions Menu in the Mixer Screens
In all mixer screens you will find similar function menus that only differ by another labeling on
the top menu entry. The next figure shows an example of the functions menu in the mix master
screen. In detail, you have the following options:
1 Reset x Sets all input fields to their original setting.
2 Layers Switches among the individual layers. You can find more about layers in chapter
9.8 - Icon Line in the Player / “layers” Icon - on page 66.
11.16 Functions Menu in the Routing Screens
The functions menu in the routing screens is similar to the mixer screens.