Owner`s manual

Reference Section
142
11.12 Routing at the [effect] Icon
To open this screen, select from the main screen the mixer icon. Then touch the effect icon and the [Routing]
button in the bottom line. Afterwards, the following routing screen will open:
This screen allows you to configure the routing for the outgoing signals of both effect procesors. You have the
following options:
1 You may select in both selection menus the desired effect. If no effect has been selected,
you will find here the entry “not set”.
2 The selection field 1/2 routes the signal to the line outputs 1 and 2.
3 The selection field 3/4 routes the signal to the line outputs 3 and 4.
4 The [edit] button opens a screen in which you may edit the effect parameters. This allows
you to configure the effect at your own taste. The appearance of the edit window depends
on the effect. The next figure shows an example of the edit window for the Chorus effect: