Owner`s manual

....
Mixer Module
141
Please notice that after selecting this screen the synthA/synthB icon will change in the bottom line. The entry 1-8/B1-8
will be found there. This button allows you to switch between the tracks 1-8 and 9-16. The following explanations apply
for both screens.
To open this screen, select from the main screen the mixer icon. Then touch the icons synthA or synthB and the
[Routing] button in the bottom line. Afterwards, the following routing screen will open:
This screen allows you to configure the routing for the 16 outgoing signals from synthesizer A (synthA) as well as the
16 outgoing tracks from synthesizer B (synthB). You have the following options:
1 The upper button indicates the name of the sound that is currently configured for this
track. If a MIDI file is loaded the names of the tracks will be displayed here. When
selecting it, the MULTISTATION will switch back to the corresponding mixer screen.
The result is the same as if you would select the [Mixer] button in the bottom line.
2 The selection field 1/2 routes the signal to the line outputs 1 and 2.
3 The selection field 3/4 routes the signal to the line outputs 3 and 4.
4 The selection field Eff1 routes the signal to the effect processor 1.
5 The selection field Eff2 routes the signal to the effect processor 2.