Owner`s manual

....
Mixer Module
139
4 The fader adjust the track’s volume. -96 dB means no audible sound and 10 dB means
maximum possible volume. As standard, the level is set to 0 dB.
11.9 Switching to the routing screens
After selecting the icons
1 tracks
2 Ktracks
3 synthA
4 synthB
5 effect
6 line
7 master
in the icon line of the mixer module, you have the option in the bottom line to switch to the routing screens. Do this
by selecting the [Routing] button. Please notice that each area has its own routing screen, as if it would be behind the
screen that you are seeing. For instance, if you have selected the
tracks icon, the screen will be titled at the upper
right with [Mix HD Trks]. Touching the routing button takes you to the routing screen, which is then titled with
[Route HD Trk].
The [Mixer] button in each bottom line takes you back again to the mixer screens.
The routing screens allow you to define the outgoing assignments of each area. Or to be more specific, you adjust to
which line output of the MULTISTATION each area will send. You have the possibility to send individual areas to
different outputs. For example, use this option to send the synthesizer’s base track on a separate line output which on a
live operation could be increased and edited apart from all other signals.
Besides that, you may also configure in the routing screen if an audio area should be routed to the internal effect
processor.
The following sections will describe each routing screen.