Owner`s manual

Reference Section
138
11.8 Icon Line in the Mixer Module / [master] Icon
The icon line can be found by selecting the Mixer module from the main screen. By clicking on the master icon
in the icon line, the following screen will appear:
All audio signals flow together in this screen. You have the option to adjust the level for each division and in addition
you will find a master fader to adjust the entire level.
Please notice that the master fader is not saved in the patch.
In detail, you have in the Mix Master screen the following options:
1 The upper buttons indicate each audio part. If you select one of them they will take you
to the routing screen, which is described further below (see chapter 11.9 - Switching to the
routing screens - on page 139).
2 The mute button silences the track.
3 The knobs set the track’s position in the panorama (left versus right output), or in other
words, the distribution of the signal in the stereo field. The display 0 means very left, 100
accordingly very right.