Owner`s manual

....
Mixer Module
137
11.7 Icon Line in the Mixer Module / [line] Icon
The icon line can be found by selecting the Mixer module from the main screen. By clicking on the line icon in
the icon line, the following screen will appear:
This screen allows you to adjust the outgoing volume of both line outputs. In detail, you have the following options:
1 Both upper buttons indicate each input. If you select one of them they will take you to
the routing screen, which is described further below (see chapter 11.9 - Switching to the
routing screens - on page 139).
2 The mute button silences the track.
3 The knobs set the track’s position in the panorama (left versus right output), or in other
words, the distribution of the signal in the stereo field. The display 0 means very left, 100
accordingly very right.
4 The fader adjust the track’s volume. -96 dB means no audible sound and 10 dB means
maximum possible volume. As standard, the level is set to 0 dB.