Owner`s manual

Reference Section
136
11.6 Icon Line in the Mixer Module / [effect] Icon
The icon line can be found by selecting the Mixer module from the main screen. By clicking on the effect icon
on the icon line, the following screen will appear:
This screen allows you to select the effect that will be used in the MULTISTATION’s effect processor. In detail, you
have the following options:
1 When recalling this screen for the first time within a patch, the upper buttons will say
“not set”. This means that no effect has been chosen. If you already picked an effect, the
effect name will be displayed here (e.g. Chorus). Besides that, they take you to the routing
screen, which is described further below (see chapter 11.9 - Switching to the routing
screens - on page 139).
2 The mute button silences the track.
3 The knobs set the track’s position in the panorama (left versus right output), or in other
words, the distribution of the signal in the stereo field. The display 0 means very left, 100
accordingly very right.
4 The fader adjust the track’s volume. -96 dB means no audible sound and 10 dB means
maximum possible volume. As standard, the level is set to 0 dB.