Owner`s manual

....
Mixer Module
135
Please notice that after selecting this screen the synthB icon will change on the bottom line. The entry B 1-8 will be
found there. This button allows you to switch between the tracks 1-8 and 9-16. The following explanations apply for both
screens.
This screen allows you to adjust the outgoing volume of the up to 16 tracks of the first soundfont generators
(synthesizer B). If you want to follow the description at the proper MULTISTATION, notice that the third button from
left to right on the bottom line says Routing (the corresponding function will be explained later). The description is,
from the top to the bottom:
1 The upper buttons indicate at first the sound’s name that is used in the channel. If you
have loaded a MIDI file, the name of every single track will be displayed here. Besides
that, they take you to the routing screen, which is described further below (see chapter
11.9 - Switching to the routing screens - on page 139).
2 The mute button silences the track.
3 The knobs set the track’s position in the panorama (left versus right output), or in other
words, the distribution of the signal in the stereo field. The display 0 means very left, 100
accordingly very right.
4 The fader adjust the track’s volume. -96 dB means no audible sound and 10 dB means
maximum possible volume. As standard, the level is set to 0 dB.