Owner`s manual

....
Mixer Module
133
This screen allows you to adjust the outgoing volume of the up to 8 audio tracks that can be controlled by trigger
notes. You will find below the description of the individual area in the [Mix HDtrks]. If you want to follow the
description at the proper MULTISTATION, notice that the third button from left to right on the bottom line says
Routing (the corresponding function will be explained later). The description is, from the top to the bottom:
1 The upper buttons indicate the audio track’s number. If audio tracks triggered by trigger
notes have been loaded the names of the audio tracks will be displayed here. Besides that,
they take you to the routing screen, which is described further below (see chapter 11.9 -
Switching to the routing screens - on page 139).
2 The mute button silences the track.
3 The knobs set the track’s position in the panorama (left versus right output), or in other
words, the distribution of the signal in the stereo field. The display 0 means very left, 100
accordingly very right.
4 The fader adjust the track’s volume. -96 dB means no audible sound and 10 dB means
maximum possible volume. As standard, the level is set to 0 dB.
11.4 Icon Line in the Mixer Module / [synthA] Icon
The icon line can be found by selecting the Mixer module from the main screen. By clicking on the synthA icon
in the icon line, the following screen will appear: