Owner`s manual

Reference Section
132
bottom line says Routing (the corresponding function will be explained later). The description is, from the top to the
bottom:
1 The upper buttons first of all indicate the audio track’s number. If you have loaded an
audio song at this place the names of the audio tracks will be displayed. Besides that, they
take you to the routing screen, which is described further below (see chapter 11.9 -
Switching to the routing screens - on page 139).
2 The mute button silences the track.
3 The knobs set the track’s position in the panorama (left versus right output), or in other
words, the distribution of the signal in the stereo field. The display 0 means very left, 100
accordingly very right.
4 The fader adjust the track’s volume. -96 dB means no audible sound and 10 dB means
maximum possible volume. As standard, the level is set to 0 dB.
11.3 Icon Line in the Mixer Module / [Ktracks] Icon
The icon line can be found by selecting the Mixer module from the main screen. By clicking on the Ktracks icon
in the icon line, the following screen will appear: