Manualshelf

Owner`s manual

ManualsBrandsMiditemp ManualsMusical equipmentMP 11
131132133134135136137138139140
....
Mixer Module
129
11. Mixer Module
The mixer module allows you adjust the outgoing volume of all modules of the internal tone generator. In detail, they
are:
1 tracks The outgoing volume of the up to 8 audio tracks that can be reproduced by the
MU LT IS TAT I O N’s 8 audio generators. This is, for example, the case when you reproduce
an audio song (with up to 8 audio tracks). Please notice that the possible number of
simultaneously reproduced audio tracks is decreased when audio files are reproduced at
the same time from the trigger tracks (when you use Ktracks [see point 2 below]). Please
consider that the MULTISTATION can currently handle up to 8 mono voices or 4 stereo
voices.
2 Ktracks The outgoing volume of the up to 8 audio tracks that can be addressed through
trigger notes. Ktracks stands for “keyboard tracks”. Please notice that the number of
reproduced Ktracks decreases when you reproduce simultaneously normal audio tracks
(see point 1 above). Please consider that the MULTISTATION can currently handle up to
8 mono voices or 4 stereo voices.
3 synthA The outgoing volume of the up to 16 tracks of the first soundfont generator
(synthesizer A).
4 synthB The outgoing volume of the up to 16 tracks of the second soundfont generator
(synthesizer B).
5 effect The outgoing volume of both internal effect processors.
6 line The outgoing volume of both line inputs. Please consider that when using the line
input, you have to adjust the input level externally. The MULTISTATION cannot currently
adjust incoming volume.
A real mixer combines all previous listed audio signals to a master section. You may get this by selecting the master
icon in the icon line. You may adjust there the total volume for the above listed areas. If you are familiar with the
functions of a real mixer, you should be able to imagine the MULTISTATION’s mixer as a mixer with six sub-groups
which are routed to the master.
To reach the mixer module and the related functions, select the Mixer icon in the main screen. The following screen
will appear: