Owner`s manual

....
MIDI Module
127
1 OUT 1
2 OUT 2
3 OUT 3
4 OUT 4
5 OUT 5
6 OUT 6
7 OUT 7
8 OUT 8
9 WTSynth (internal synthesizer A)
10 WTSynth.B (internal synthesizer B)
11 Daugh.Board (daughter board)
After you have selected the output, you have the following options for configurations on the main field of the screen:
1 In the very left column a channel number is indicated, if you have chosen a MIDI port as
output. When you address one of both internal synthesizers, the sound name is displayed
here.
2 P: Click this field to enter the program number. Use the keypad and confirm with the
[ENTER/YES] key, or use the data wheel.
3 B: Click this field to enter the bank number. Use the keypad and confirm with the
[ENTER/YES] key, or use the data wheel.
4 T: Click this field to transpose the track. Use the keypad and confirm with the
[ENTER/YES] key, or use the data wheel.
5 With the fader you may adjust the (Controller 7 - Volume).
10.21 Functions Menu in the [control] Screen
You have the following options here:
1 Select MIDI port... Select the output that you want to edit.
It has basically the same function as if you would select the
second button from right on the bottom line of the screen.