Owner`s manual

Reference Section
124
10.17 Icon Line in the MIDI Module / [rec/syn] Icon
You will find the icon line by selecting the MIDI module in the main screen or by pressing the MIDI key in the
operation panel of the remote controller. If you select the
rec/syn icon in the icon line, the following screen will
appear:
This screen is for the configuration for MIDI recording and to synchronize the MULTISTATION with other MIDI
devices.
Please note: You may record MIDI data as well as audio data with the MULTISTATION. The type of recording is defined
in the
Setup module, where you switch in the area Player > Recording > Typ between MIDI and WAV. At the time
of printing this manual the parameters were only valid for MIDI recording.
On the Record/Sync screen you have the following options:
1 Record inputs: Define here from which MIDI input you want to record.
2 Synchronization You decide here if the MULTISTATION is the timing master (Internal)
or if the MULTISTATION locks to an external signal (MIDI Clock).
3 Sync outputs: Define here the output to which the MULTISTATION will send MIDI
clock, when the MULTISTATION is the timing master.