Owner`s manual

....
MIDI Module
121
5 Left After selecting the field with the note number, configure here the lower limit of the
keyboard zone.
6 Right After selecting the field with the note number, configure here the upper limit of the
keyboard zone.
7 L.Fall Decreases the velocity of the incoming notes to the border of the keyboard zones
down to the value of 0. L.Fall thereby defines the keyboard area on the left (lower) side of
the keyboard zone.
8 R.Fall Decreases the velocity of the incoming notes to the border of the keyboard zones
down to the value of 0. R.Fall thereby defines the keyboard area on the right (upper) side
of the keyboard zone.
10.13 Bottom Line in the [split] Screen
You have here the following options:
1 New Zone Creates a new keyboard zone.
2 Next Zone Jumps to the next zone.
3 Del Zone Deletes the zone that is being edited.
10.14 Functions Menu in the [split] Screen
This menu provides the following possibilities:
1 Delete Splits... Opens a window in which you may perform
additional configurations such like:
• All MIDI splits. Removes all inserted splits.
• Only on selected connector. Removes all splits on the port that you have defined in
the “Conn.” selection menu.
• Only on selected con. & channel. Removes the splits that are assigned to a specific
channel on a specific port. Please note that both areas, cons and split, communicate
with each other. You may easily select a port in the area of routing and then switch to
the functions menu of the [split] screen to delete a split with the here-in described
function.