Owner`s manual

Reference Section
116
2 Delete processors... Removes processors from the list. After selecting this function, ano-
ther window will open. You have the following options there:
• All MIDI processors Removes all processors that are defined somewhere.
• Only on selected connector Removes the processors of a specific port. Here, you
might recognize that both areas are related to each other. You may select a port in the
routing area, and then switch to this screen to delete the processors of a specific port
through the functions menu.
• Only on selected con. & channel Removes the processors that are assigned to a
specific channel on a specific port. The same explanations of the previous section also
apply here.
3 Layers By selecting this function, an additional menu will open in which you may select
different layers. From then on, all configured routings will apply to the layer that is
indicated in the title line. You will find more about the layers in chapter 9.8 - Icon Line in
the Player / “layers” Icon - on page 66.
4 New proc... Creates a new processor.
10.9 Bottom Line in the [allproc] Screen
You have the following options here:
1 Edit Opens the configuration window of the processor that is currently highlighted (black
background). Use this window to modify values of the processor.
2 Delete Removes the highlighted processor from the processor list.
3 New... Creates a new processor. Please refer to chapter 10.7 - Icon Line in the MIDI
Module / [allproc] Icon - on page 111 for basic explanations.
10.10 Icon Line in the MIDI Module / [filter] Icon
You will find the icon line by selecting the MIDI module in the main screen, or by pressing the MIDI key on the
control panel. If you select the
filter icon in the icon line, the following screen will appear: