Owner`s manual

....
MIDI Module
115
- lay. x/bank y
- lay. x/bank (man.)
• Close the window with Yes to apply the settings. Select No to abort the action.
In conclusion of the chapter, one more hint: you may activate any number or processors. As soon as you have activated
a processor, it will be added to the processor list. Take a look at the following list with one entry:
This window gives you the following information:
1 i/o Indicates if the processor is working on the input or output.
2 port Indicates the MIDI port that is being used.
3 ch Indicates the MIDI channel that is being processed.
4 proctype Indicates the processor type.
5 params Indicates the settings for the individual processor.
The above figure can be translated the following way: A program change command with the program number “1” is
being sent to bank number “0”. The MIDI message leaves the MULTISTATION on MIDI channel 1 on output 2.
10.8 Functions Menu in the [allproc] Screen
This menu provides some functions that can also be found, with one exception, on the
bottom line of the screen. You have the following options:
1 Edit proc... Opens the configuration window of the
processor that is currently highlighted (black background).
Use this window to modify values of the processor.