Owner`s manual

....
MIDI Module
113
2 Reassign Control You may modify a MIDI controller into another one. In detail, you
may configure:
• Port Select here the input or output on which the processor should work. Please notice
that you also have access to the internal tone generator as well as to a connected
external daughterboard.
• Channel Select here the MIDI channel on which the processor should work.
• Original ctrl Configure here the controller that you want to modify.
• Reassign to Configure here in which controller the modification should take place.
• Close the window with Yes to apply the settings. Select No to abort the action.
3 Keyboard audio assignment Defines a keyboard area that will exclusively send the
trigger notes that you have specified in the [assigns] part. For more information, refer to
chapter 9.15 - Icon Line in the Player / “assign” Icon - on page 78. In detail, you may
configure:
• Port Select here the input or output on which the processor should work.
• Channel Select here the MIDI channel on which the processor should work.
• Left Note Configure here the lowest note on the keyboard.
• Right Note Configure here the highest note on the keyboard.
• Output Channel Configure here the channel of the audio generator that will be
controlled by the keyboard area.
• Close the window with Yes to apply the settings. Select No to abort the action.
4 Channel volume Sends a volume command (Controller 7 - Volume) with configurable
volume. In detail, you may configure:
• Port Select here the in or output on which the processor should work. Please notice
that you also have access to the internal tone generator as well as to a connected
external daughterboard.
• Channel Select here the MIDI channel on which the processor should work.
• Vo l um e Enter here the desired volume between 0 - 127.
• Close the window with Yes to apply the settings. Select No to abort the action.