Owner`s manual

Reference Section
100
In the first line top right as usual you find the name of the screen (here: D.J.) and besides that the icon for the access to
the main area from this screen. The main area is divided into two areas each representing an individual playback unit.
In other words: Any song from your repertory can be loaded into every area. Other than that each area has its own con-
trol elements such as the [Play/Stop] buttons and [Fade in...]. The fader in the middle of the screen works in both areas.
To crossfade from one song to another proceed as follows:
1 Click on the entry pch:1 in the upper left part of the screen.
2 Use the data wheel to look for the first song, the title of the currently selected song will be
displayed below the selecting area. Because the title list relates to the current patch list,
sequence and content are identical with it.
3 Make sure the big fader in the middle of the screen is at the left end position.
4 Click the [Play1] button. The first songs starts to play.
5 Now load the second song into the right area of the D.J. module by clicking on the entry
pch:2 in the upper left part of the screen and use the data wheel to look for the song you
want to crossfade into.
6 Start the second song by clicking on [Play2].
7 You can´t hear the second song yet because the fader is still on the far left position.
8 To crossfade from the first song to the second move the fader with the finger from left to
right. This fades the first song out and the second song in.
This procedure can be automated as well. To do so use the [Fade in A] and [Fade in B] buttons in the lower area of the
screen. After selecting one of these buttons the corresponding song will be faded in. The time for this to happen can be