User manual

time again. After this the box starts again with the work mode.

How to set transpose preset:

1. Hold down and press the PANIC button minimum 5 Seconds

while plugging the MIDI In to power the system. The LED

flashes, to show that you are now in "setup mode" .

2. Set switch 2 to ON

3. Press keyboard, the key C4 is transpose 0, next higher key is

transpose +1, etc. You can step up and down to set the

Transpose in a maximum of +/- 11 semitones.

For example:

C#4 – Transpose +1

D4 – Transpose +2

D#4 - Transpose +3

and so on.

Also downwards:

H3 – Transpose -1

B3 – Transpose -2

A3 – Transpose -3

and so on.

4. To confirm the changed setup, press the Panic button a short

time again. After this the box starts again with the work mode.

How to set velocity preset value:

1. Hold down and press the PANIC button minimum 5 Seconds

while plugging the MIDI In to power the system. The LED