User manual
Table Of Contents
- Preface
- IMPORTAND SECURE INFORMATION
- Main Features
- Something you should know before using the MIDI Functions
- Using the MIDI Functions
- Using the Midi-Interface
- Default Setting of the Miditech i2-61 Black Edition
- Overall Diagram Preview
- 2. Pitch Bend Wheel
- 3. Modulation Wheel
- 4. Data Entry Slide
- 11. MIDI / SELECT button
- 5. MIDI Channels group
- 7. Octave group
- 8. Transposer Group
- Reset key
- 9. Control Change data entry by Numeric keypad
- Program key
- Rear Panel
- Sustain jack
- MIDI OUT jacks
- USB Port / power port
- Power switch
- Trouble Shooting
- Specifications
- MIDI Implementation Chart
Default Setting of the Miditech i2-61 Black Edition
The Miditech i2-61 Black Edition will always select the following values for their parameters
when the power is turned on.
*Transmit MIDI Channel no. 1.
*Default Octave will be from C2 (36) to C6 (84)
*Default After Touch value will be 0
*Default Velocity value will be 0
*Default Reverb Depth value will be 64
*Default Pan Pot value will be 64
*Default Volume value will be 127
*Default CC Data value will be 0
*Default CC no. value will be 0
*Default Control Change (CC-00=0, CC-32=0) message will be transmitted.
*Default Program Change (PG=1) message will be transmitted.
10