Owner`s manual


4. Remove dispenser. (see dispenser removal and replacement)
5. Remove door handle assembly. (see door handle assembly removal and replacement)
6. Reverse the above procedure to install. And check out all connectors connects well.
Removal and Installation
1. Take off cutlery basket, basket and filter system.
2. Remove all screws for fixing shell with tank assembly in the front of dishwasher machine.
3. Remove all screws for fixing shell with backboard and bottom board in the rear of
dishwasher machine.
4. Turn the dishwasher machine. Remove all screws for fixing shell with bottom board in the
bottom of dishwasher machine.
5. Unfix all snap-fits for fixing shell with other parts.
Include two snap-fits of backboard (1),
two snap-fits of washboard (3), and six
snap-fits of bottom board (2), (4) and (5).
Tips: If you press edges of shell like
illustrator, you can easy unfix all snap-fits after
removing all screws that fix shell with other
parts.
6. Reverse the above procedure to install.
And check out all connectors connects
well.
BackView(withshellremoved)
Shell
Screws
Screws
Screws
Sna
p
-fits
(
1
)
Sna
p
-fits
(
2
)
Snap-fits (3)
Snap-fits (4)
Screws
Snap-fits (5)