User Instructions

CLEARANCES AND DIMENSIONS

MICROWAVE DRAWER MEASUREMENTS

· Dimensions that are shown in Figure 1 must be

used. Given dimensions provide minimum

clearance. Locate electrical outlet in the shaded

area in the upper left-hand corner of the cutout.

Figure 1

· Contact surface must be solid and level. Pay special attention to the floor on which the

Microwave Drawer will sit. The floor of the opening

should be constructed of plywood strong

enough to support the weight of the oven (about 100 pounds).

· Check location where the Microwave Drawer will

be installed for proper electrical supply

· Your oven can be built into a cabinet or wall by itself or under a gas or electric wall oven.

· Be sure that the clearance of the floor between the wall oven and the microwave drawer is a

minimum of 2-inches.

· The microwave interior will easily accommod

ate a

9" x 13" oblong dish or a bag of microwave

popcorn.

See Figure 3