HEAT AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. CR193-RG70E2(2)BGEU1 16117000001054 20160930 Thank you very much for purchasing our air conditioner. Please read this owner's manual carefully before using your air conditioner. Make sure to save this manual for future reference.
HEAT Operation of buttons 1 ON/OFF Button( ) Turns the air conditioner ON and OFF. 2 Temp Up Button( ) Increases temperature in 1OC(1OF) O O increments. Max. temperature is 30 C(86 F). CONTENTS Remote controller Specifications................................................... 1 Operation of buttons ............ ......................................................... 2 Indicators on LCD .......................................................................... 6 How to use the buttons .........
HEAT Operation of buttons Operation of buttons 5 6 Temp 2 1 3 Mode 4 5 6 7 OK Timer Super Options Fan 8 Swing 9 Direct Timer Button Press this button to initiate the auto-on/ auto-off time sequence. Super Button Press this button under cooling operation, the set temperature will change to 17O C, the fan speed shift to high and bring faster cooling operation.
HEAT SELF CLEAN function( ) Under SELF CLEAN mode, the air condition er will automatically clean and dry the Evaporator and keep it as fresh for the ne xt operation. It is not available under heating or fan mode. Temp 2 1 3 Mode 4 Fan OK 5 Timer 6 Super 7 Options Swing Direct 8 9 10 11 12 13 ELECTRIC HEATING function( ) Used to turn on the auxiliary heating device when the outdoor temperature is extremely low.
HEAT How to use the buttons How to use the buttons AUTO operation DRY operation(dehumidifying) SETTING TEMPERATURE 1. Press the MODE button to select DRY mode. 2. Set your desired temperature using the Temp or Temp button. 3. Press the ON/OFF button to start the unit. The operating temperature range for units is 16-30 OC/60-86 O F. You can increase or decrease the set temperature in 1 OC/1 O F increments.
HEAT How to use the buttons HEAT operation HEAT Temp 2 1 Mode Timer Super Fan OK Swing Options Direct 4 3 1. Press the MODE button to select H EAT mode. 2. Set your desired temperature using t he Temp or Tem p butt on. 3. Press the FAN button t o select the fan speed in a range of AU-F%, in conjunction with Temp or Temp button. 4. Press the ON/OFF button to start the unit. NOTE: As outdoor temperature drops,the , performance of your unit s HEAT function may be affected.
HEAT Setting both TIMER ON and TIMER OF F at the same ti me Exampl e: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off (see the figure below) Keep in mind that t he time periods you set for both functions refer to hours after the current time. For example, say that the current time is 1:00 PM, and you want the unit to turn on aut omatically at 7:00 PM. You want it to operate for 2 hours, then automatically turn off at 9: 00 PM.
HEAT Handling the remote controller Location of the remote controller. Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. 8m CAUTIONS The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit. Prevent any liquid from falling into the remote controller. Do not expose the remote controller to direct sunlight or heat.
HEAT
